Precision of fabric cutting: Fabric cutting should be done accurately as per exact dimension of the pattern pieces in the marker. Accurate cutting depends on methods of cutting and marker planning. If manual cutting method is used, then cutting accuracy depends on sharpness of knife, skill of operator, and attentiveness of operator. Computer controlled cutting and die cutting have their self cutting accuracy.
Consistent cutting: Whatever be the cutting method used for fabric lay cutting, it should be ensured that the shape of the cut components from top to bottom lay are of exact size and shape, otherwise the garments produced will be defective.
Infused edge: During fabric cutting, the friction between the fabric and the blade produces temperature in the blade; the temperature may be up to 3000C. If the fabric contains synthetic fibers e.g. nylon, polyester, acrylic or their blends, then fused edge may result in the fabric. Because most of those fibers melt at around 2500C. Therefore, sticking of cut edge of fabric will increase the fabric wastage. Moreover, the fused edge after cooling will form hard bid, which will be a problem of irritation during use of garments.
To avoid the problem of fused edge formation, the following steps may betaken:
- Reduce the height of the lay - Reduce the cutting speed
- Use anti-fusion paper in the lay at regular interval
- Lubricate the knife during cutting
- Use anti-fusion paper in the lay at regular interval
- Lubricate the knife during cutting
Supporting of the lay: Surface of the cutting table depends on methods of fabric cutting. The table surface should be capable to support the lay as well as to ensure that all the plies are cut at a time during fabric cutting.
Post A Comment:
0 comments so far,add yours
Post a Comment